How to Use:
There is a Narrow on the Booster Pump Showing You the Outlet Hose Direction. The Opposite Side is the Inlet Hose Direction.
Make Sure the Hose and the Pump Connection is Perfectly Sealed and Secure.
Power Supplied, Pump Start Working, Power Off, Stop Pumping.
No Power Switch, You Can Install One if You Need it.
Filter Installing is Suggested(holes dim bigger than 0.150mm,or you can say >80 mesh water filter).
For the First Time Using, Please Pump 5-10sec to Empty the Air Inside the Pump and the Hose, and then Power Off the Pump ,Now the Pump is 100% Ready to Serve You.
Voltage: 12V D/C
Power consumption: 70Watts
Motor lifespan: 3-5 years
Max inlet hose Length: 2 meters
Pump head: 70 meters
Max flow rate: 6L/Min
Boost pressure: up to 0.9-1.0 Bar
Inlet/outlet caliber: 3/8″ (10mm)
Tips for You：
1.To Longer the Work life of the Pump, Power it Off for a Quarter When It Constantly Worked for Over 3 Hours.
2.Every Pump was Inspected Pumping Water by a QC Program, A little Bit Water Might Visible When You Got it , Just Don’t Worry, Everything is Fine.
3)This Pump Could Not Work Under the Water, Please Don’t Put the Pump itself into the Water(You Need a Hose to Reach the Water)
Package Included： 1 x Self Priming Water Pump
1 x Instruction manual
Low Power Consumption(70Watts),High Performance(6L/Min,131 PSI);
Easy to Install，Easy to Use:Good Replacement for Your Old Water Pump;
Widely Used in Daily Life: Car Washing,Garden Watering,House Cleaning,etc.(Of Course You Need to Use Your Own Hose and Sprayer);
High Quality Smart Motor:Over Pressure Protected,Stop Pumping When Pressure is Overload,Automatically Recover When Pressure Back to Normal;
Corrosion Resistance,Anti-Rust,Solid Construction. 18-Month-Warranty for this Water Pump